Description :
Platina Brake Fluid DOT3 Brake Fluid is formulated from mixed polyalkylene glycol ethers together with lubricity additives and corrosion inhibitors. The high level of protection against wear and corrosion offered by this product will prolong the service life of the system components making it especially suitable for use in hydraulic clutch systems.
It is fully compatible with other fluids meeting FMVSS 116 DOT 3, DOT 4 and DOT 5.1.
In order to maintain the superior performance characteristics of Platina Brake Fluid DOT 3, avoid mixing with non Platina brake fluid products.
Application :
Platina Brake Fluid DOT 3 is designed for use in the hydraulic brake and clutch systems of passenger cars and commercial vehicles with the exception of those systems for which a mineral oil based fluid is recommended .
As with all brake fluids which contain certain glycol ethers, care should be taken to avoid spilling this product on paint work as it may have a damaging effect. In case of spillage, rinse the affected area with water immediately: Do not wipe
Conditions of Use :
- All conventional brake fluids deteriorate during use
- It is strongly recommended that Platina Brake Fluid DOT 3, should be changed according to the vehicle manufacturers advice. In the absence of such advice, a 1 year change period is recommended.
Brake Fluid DOT 3 | Characteristics |
---|---|
Appearance : | Bright clear liquid |
pH : | 7-11 |
ERBP (Equilibrium Reflux Boiling Point) : | min 240 |
Density @ 20C : | 1.05 |
Wet Equilibrium Reflux Boiling Point : | min 145 |
Product Size :
- 250ml, 50ltr ,55ltr ,210ltr